Players Handbook (page 102)
Infravision, the ability to see radiation in the infra-red spectrum, is an ability possessed by most of the creatures dwelling below ground and nocturnal animals. Some characters have this ability due to race or by magical means. However, as many characters can only see in light which is normal to the human visual spectrum, and mapping requires light also, some form of light generating device is necessary for activities in dungeons or at night.
House Rule
Races available to player characters do NOT have any infravision, ultravision or dark vision. Use a torch, some other illuminating source or be blind.
This decision is based on a number of online discussions in Old School TTRPG/AD&D groups, where it is pointed out that these abilities adversely effect the chances of characters performing certain feats. For example, if the rule is applied correctly, a thief would be near on impossible to sneak up on most characters and creatures. As their body warmth would stick out like a sore thumb.
So by removing this ability, this increases the chances of surprise for and on the party, it intensifies suspense in dark situations, and means the players or NPCs have to have some way (usually resource limiting) of lighting up the route.
It also means that others have to do the same, so spotting an NPC party navigating the forests at night will be easy to spot because they will have torches.
The Light Source table will be used for illumination guidance.
Implementation Details
Before a character can do anything in the dungeon or the wilderness, he has to be able to see what he is doing. If a character can't see a target, his chances of hitting it are very small. If he can't see, he can't read a scroll or a large "Keep Out" sign on the wall.
Limits of Vision
The first limitation on vision is how far away an object can be before it cannot be seen clearly. Size and weather have a great effect on this. Mountains can be seen from great distances, 60 to 100 miles or more, yet virtually no detail can be seen. On level ground, the horizon is about five to 12 miles away, but a character usually cannot see a specific object that far away. The limit of vision for seeing and identifying man-sized objects is much less than this.
Under optimum conditions, the maximum range at which a man-sized object can be seen is about 1,500 yards, if it is moving. If the object doesn't move, it usually cannot be seen at this distance. Even if it is moving, all that can be seen is a moving object. The character cannot tell what it is or what it is doing.
At 1,000 yards, both moving and stationary man-sized objects can be spotted. General size and shape can be determined, but exact identifications are impossible. It is not likely that creature type can be identified at this range, unless the creature has a very unique shape.
At 500 yards, general identifications can be made. Size, shape, color, and creature type are all distinguishable. Individuals still cannot be identified, unless they are distinctively dressed or separated from the rest of the group. Livery and heraldic symbols or banners can be seen if large and bold. Most coats of arms cannot be distinguished at this distance. General actions can be ascertained with confidence.
At 100 yards, individuals can be identified (unless, of course, their features are concealed). Coats of arms are clear. Most actions are easily seen, although small events are unclear.
At 10 yards, all details but the smallest are clear. Emotions and actions are easily seen, including such small actions as pick-pocketing (if it is detectable).
Of course, conditions are seldom perfect. There are a number of factors that can reduce visibility and alter the ranges at which things can be spotted and identified. Table 1 lists the effects of different types of conditions.
All ranges are given in yards.
"Movement" indicates the maximum distance at which a moving figure can be seen. "Spotted" is the maximum distance a moving or a stationary figure can be seen. "Type" gives the maximum distance at which the general details of a figure can be seen—species or race, weapons, etc. "ID" range enables exact (or reasonably exact) identification. "Detail" range means small actions can be seen clearly.
There are many factors other than weather that affect viewing. Size is an important factor. When looking at a small creature (size S), all categories are reduced to the next lower category (except the "detail" range, which remains unchanged). Thus, under clear conditions, the ranges for seeing a small creature are "movement" at 1,000 yards, "spotted" at 500 yards, "type" at 100 yards, and "ID" and "detail" at 10 yards.
When sighting large creatures, the "movement," "spotting," and "type" ranges are doubled. Exceptionally large creatures can be seen from even greater distances. Large groups of moving creatures can be seen at great distances. Thus, it is easy to see a herd of buffalo or an army on the march.
The ranges given in Table 1 do not take terrain into account. All ranges are based on flat, open ground. Hills, mountains, tall grass, and dense woods all drastically reduce the chances of seeing a creature. (The terrain does not alter sighting ranges, only the chances of seeing a creature.) Thus, even though on a clear day woods may hide a bear until he is 30 yards away, it is still a clear day for visibility. The bear, once seen, can be quickly and easily identified as a bear. The DM has more information on specific terrain effects on sighting.
Table 1: Visibility Ranges
| Condition |
Movement |
Spotted |
Type |
ID |
Detail |
| Clear sky |
1,500 |
1,000 |
500 |
100 |
10 |
| Fog, dense or blizzard |
10 |
10 |
5 |
5 |
3 |
| Fog, light or snow |
500 |
200 |
100 |
30 |
10 |
| Fog, moderate |
100 |
50 |
25 |
15 |
10 |
| Mist or light rain |
1,000 |
500 |
250 |
30 |
10 |
| Night, full moon |
100 |
50 |
30 |
10 |
5 |
| Night, no moon |
50 |
20 |
10 |
5 |
3 |
| Twilight |
500 |
300 |
150 |
30 |
10 |
Light
Most characters cannot see much without light. Some night conditions (those for the outdoors) are given in Table 1. But all of these assume some small amount of light. In totally lightless conditions, normal vision is impossible, unless a source of light is carried by the party.
Light sources vary in the area they affect. Table 2 gives the radius of light and burning time for the most common types of light sources.
Of course, while a lantern or fire enables characters to see, it does have some disadvantages. The greatest of these is that it is hard to sneak up on someone if he can see you coming. It is hard to remain inconspicuous when you have the only campfire on the plain, or you are carrying the only torch in the dungeon. Furthermore, not only do creatures know you are coming, they can generally see you before you see them (since the light source illuminates the area around you, those outside this area can see into the area). Characters should always bear these risks in mind.
Table 2: Light Sources
| Source |
Radius |
Burning time |
| Beacon lantern |
240ft* |
30 hrs./pint |
| Bonfire |
50ft |
1⁄2 hr./armload |
| Bullseye lantern |
60ft* |
2 hrs./pint |
| Campfire |
35ft |
1 hr./armload |
| Candle |
5ft |
10 min./inch |
| Continual light |
60ft |
Indefinite |
| Hooded lantern |
30ft |
2 hrs./pint |
| Light |
20ft |
Variable |
| Torch |
15ft |
30 min. |
| Weapon** |
5ft |
As desired |
- Light from these is not cast in a radius, but rather in a cone-shaped beam. At its far end, the cone of light from a beacon lantern is 90 feet wide. A bullseye lantern has a beam 20 feet wide at its far end.
- Magical weapons shed light if your DM allows this optional rule.
Infravision
As mentioned above, no characters or monsters have the power of infravision.
Using Mirrors
At times it is useful for characters to look at objects or creatures via reflections in a mirror. This is particularly true of those creatures so hideous (such as a medusa) that gazing directly upon them might turn the viewer to stone. When using a mirror, a light source must be present. Second, attempting to direct your actions by looking in a mirror is very disorienting (try it and see). Thus, all actions requiring an ability or proficiency check or an attack roll suffer a -2 penalty. The character also loses all Dexterity bonuses to Armor Class if fighting an opponent seen only in a mirror.
Comments